How to Download and Configure Linksys WRT120N Router as a Repeater
If you have a Linksys WRT120N router and you want to extend the range of your wireless network, you can use it as a repeater. A repeater is a device that receives and retransmits a wireless signal, boosting its strength and coverage. In this article, we will show you how to download and configure your Linksys WRT120N router as a repeater in a few simple steps.
Step 1: Download the Latest Firmware for Your Router
Before you start configuring your router as a repeater, you need to make sure that it has the latest firmware version installed. Firmware is the software that runs on your router and controls its features and performance. To download the latest firmware for your Linksys WRT120N router, follow these steps:
Download configurar router linksys como repetidor wrt120n 8
Go to the Linksys Support Site and enter your router's model number in the search box.
Select the \"Downloads / Firmware\" option from the menu.
Choose the hardware version of your router from the drop-down list. You can find the hardware version on the label at the bottom of your router.
Download the firmware file to your computer and save it in a convenient location.
Step 2: Connect Your Router to Your Computer
Next, you need to connect your Linksys WRT120N router to your computer using an Ethernet cable. Plug one end of the cable into one of the LAN ports on the back of your router and the other end into an Ethernet port on your computer. Make sure that your router is powered on and that your computer is not connected to any other network.
Step 3: Access Your Router's Web-Based Setup Page
Now, you need to access your router's web-based setup page, which is where you can change its settings and configure it as a repeater. To access your router's web-based setup page, follow these steps:
Open a web browser on your computer and type 192.168.1.1 in the address bar. This is the default IP address of your router.
Enter admin as the default username and password when prompted. If you have changed these credentials before, use your custom ones instead.
Click \"OK\" or \"Log In\" to access your router's web-based setup page.
Step 4: Update Your Router's Firmware
Once you are on your router's web-based setup page, you need to update its firmware using the file that you downloaded in step 1. To update your router's firmware, follow these steps:
Click on the \"Administration\" tab at the top of the page.
Click on the \"Firmware Upgrade\" sub-tab on the left side of the page.
Click on the \"Browse\" or \"Choose File\" button and locate the firmware file that you saved on your computer.
Click on the \"Start Upgrade\" or \"Upload\" button to begin the firmware update process.
Wait for a few minutes until the firmware update is complete. Do not turn off or unplug your router during this process.
When prompted, click on the \"Continue\" button to reboot your router.
Step 5: Configure Your Router as a Repeater
After updating your router's firmware, you can configure it as a repeater. To do so, follow these steps:
Go back to your router's web-based setup page and click on the \"Wireless\" tab at the top of the page.
Click on the \"Basic Wireless Settings\" sub-tab on the left side of the page.
Select \"Repeater\" from the \"Wireless Mode\" drop-down menu.
Select \"Manual\" from the \"Configuration View\" drop-down menu.
Type in a unique name for your repeater in the \"Network Name (SSID)\" field. This name should be different from your main router 0efd9a6b88